# $FreeBSD: release/9.1.0/sys/mips/conf/AR71XX.hints 213240 2010-09-28 03:34:51Z gonzo $
hint.apb.0.at="nexus0"
hint.apb.0.irq=4

# uart0
hint.uart.0.at="apb0"
# see atheros/uart_cpu_ar71xx.c why +3
hint.uart.0.maddr=0x18020003
hint.uart.0.msize=0x18
hint.uart.0.irq=3

#ohci
hint.ohci.0.at="apb0"
hint.ohci.0.maddr=0x1c000000
hint.ohci.0.msize=0x01000000
hint.ohci.0.irq=6

#ehci
hint.ehci.0.at="nexus0"
hint.ehci.0.maddr=0x1b000000
hint.ehci.0.msize=0x01000000
hint.ehci.0.irq=1

# pci
hint.pcib.0.at="nexus0"
hint.pcib.0.irq=0

hint.arge.0.at="nexus0"
hint.arge.0.maddr=0x19000000
hint.arge.0.msize=0x1000
hint.arge.0.irq=2
# PHY4 = 1 << 4
hint.arge.0.phymask=0x10
# Uncomment this hint for RS (not PRO)
# PHY20 = 1 << 20
# hint.arge.0.phymask=0x100000

hint.arge.1.at="nexus0"
hint.arge.1.maddr=0x1a000000
hint.arge.1.msize=0x1000
hint.arge.1.irq=3
# PHY1, PHY2, PHY3 
hint.arge.1.phymask=0x0e
# should be 100 for RS 
hint.arge.1.media=1000
hint.arge.1.fduplex=1
# Uncomment this hint for RS (not PRO)
# hint.arge.0.phymask=70000

# GPIO
hint.gpio.0.at="apb0"
hint.gpio.0.maddr=0x18040000
hint.gpio.0.msize=0x1000
hint.gpio.0.irq=2

# RF led
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="rf"
# pin 2
hint.gpioled.0.pins=0x0004

# SPI flash
hint.spi.0.at="nexus0"
hint.spi.0.maddr=0x1f000000
hint.spi.0.msize=0x10

hint.mx25l.0.at="spibus0"
hint.mx25l.0.cs=0

# shares the same bus with mx25l. 
# CE low for flash, CE high for RTC
# at the moment it's just stub until SPI bus is ready for such hacks
# hint.rtc.0.at="spibus0"
# hint.rtc.0.cs=0

# Watchdog
hint.ar71xx_wdog.0.at="nexus0"